Ask Experts Questions for FREE Help !
Ask
    bobgoug's Avatar
    bobgoug Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 22, 2008, 02:51 PM
    Wiring Instructions for A Harbor breeze Ceiling Fan With Light
    I have seen something on the board about Wiring this fan type with two wires coming out of the ceiling. In this post answer the remidy was given to wire blue and black to the red and all whites to whites. My problem is I have a RED BLACK and WHITE coming from the ceiling. The fan has a White, Black and Blue coming from the Fan. How do you suggest wiring this one with the three wires coming from the ceiling?

    Thanks in advance.

    Bob Gougeon
    Bloomington, Indiana
    [email protected]
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Jun 23, 2008, 04:41 AM
    Do you have 2 wall switches?
    If so, then most likely the red wire is from one switch and the black wire is from the other.
    If you hook (black-black, white-white, red-blue), then the switch with the red wire on it will operate the fan's light. The other switch will operate the fan.
    It would be a good idea to check the voltage (black to white, and red to white) and see if you can control the two circuits individually with the switches.

    Hope this helps,
    WallyH
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Jun 23, 2008, 04:24 PM
    The above wiring is correct.

    Ceiling fan wiring - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harbor Breeze Ceiling Fan w/ Light [ 11 Answers ]

Please help! I cannot figure out how to change the burnt out light in my ceiling fan. I have tried turning the glass portion, but it won't budge. Any ideas? I've tried the Harbor Breeze website, but cannot find the manual online. :( Thanks!

Harbor Breeze 69" Ceiling Fan Wiring [ 3 Answers ]

I just purchased a Harbor Breeze 69" (twin blades) ceiling fan and am having problems with the wiring. I have black, red, white, and green from the ceiling box and black, white, and blue to the ceiling fan. The remote transmitter has black and white on the inbound side and black, white, and blue...

Harbor Breeze Galileo Ceiling Fan - Wiring [ 4 Answers ]

I installed the above mentioned fan ( Model: GAL52BC4LKRC) and have not been able to get the bottom set of lights working. Without the transponder or the original remote for the unit I was able to get the top lights and the fan working on a universal remote but not the bottom lights. The unit has...

Harbor breeze ceiling fan light wiring [ 1 Answers ]

How to wire Harbor Breeze Avian Ceiling fan light-followed instructions-has a remote-fan works fine-light doesn't-manual says blue remote to blue light wire-tried wiring blue to black ac power-no luck-HELP

Harbor Breeze Ceiling Fan Light Kit [ 3 Answers ]

I'm replacing an old ceiling fan. The fan was controlled by the pull chain and the light by the wall switches (2 three-way). The new fan is a Harbor Breeze. Installed it, the light works with either 3-way switch. The fan works fine on all speeds. However, when the fan is turned on with the light...

View more questions Search