Ask Experts Questions for FREE Help !
Ask
    conrad36's Avatar
    conrad36 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 11, 2013, 03:18 PM
    Wiring a 4 light fixture with a 3 position pull chain switch
    I am trying to replace a zing ear switch that controls my ceiling fan light fixture. The light fixture has 4 bulbs and two opposing bulbs light with 1 pull of the switch, the other 2 bulbs light with a second pull of the switch, all 4 bulbs light with a third pull and all lights are off with the final pull. The switch has a black wire at L, a red wire at 1 and a blue wire at 2. each light fixture has a black and white lead the wires from the fan unit are black with a grey stripe and white. What wires connect to what?

Check out some similar questions!

How to wire a pull chain switch to ceiling fixture [ 2 Answers ]

Hello, I have a pool table light that I need to install. The existing wires in the ceiling are as follows. There are 3 black wires. 3 white wires and a cooper wire. Only 1 white wire has power and only 1 black. My question is what wires do I use to make this thing work and what to do with the...

How to change a pull chain fixture to a fluorescent light fixture with a switch ? [ 1 Answers ]

I would like to install a switch for a pull light fixture. The only power is from the light fixture, but I want to put a light switch on the wall as I enter the room, Can you help ?

Wiring pull chain kit to light fixture [ 1 Answers ]

I am installing a 4 light chandelier in the ceiling and need to add a pull chain kit, my question is where does the pull chain wiring get wired to? I know the chandelier black and white wires go to the ceiling wires but am confused as to where to wire the pull chain black and wires to.

Replacing a pull chain light fixture [ 2 Answers ]

I would like to replace a 2 bulb, glass shade, bedroom type pull chain light in my basement room redo. There is a poor selection of pull on fixures out there! Can a 3 arm ceiling fan fixure be installed alone as a ceiling light that would pull on/off? Can I use a canopy kit to cover the...

Wiring a pull chain light fixture [ 2 Answers ]

I replaced a 1956 ceramic pull-chain lighting fixture in the basement (bare bulb), but can't get it to work. (My kids pulled the chain out of the old one, which used to work fine.)I wired a new one the same way, but it won't turn on. I replaced the new fixture with another new fixture, thinking...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.