I have a new 3 way light socket. I have two identical wires coming from the floor lamp. The new socket has one silver screw and one brass screw. Do I hook each wire to each screw?
Add your answer here.
Check out some similar questions!
One socket of light fixture not working [ 3 Answers ]
I have a ceiling fixture with 2 bulb sockets. One of the sockets was not working, I assumed that it was old and needed to be replaced. I purchased a new fixture and wired it the same way as the old one, white to white and black to black. I still have the same issue. One socket is not working. ...
Bathroom Vanity Light w/ Electrical Socket [ 3 Answers ]
I did a search here and found I had addressed this type of light with a built in outlet a couple of times. Here area couple of links to previous questions: https://www.askmehelpdesk.com/electrical-lighting/bathroom-vanity-light-electrical-socket-165231.html ...
Flash in light socket [ 1 Answers ]
Why do I get a flash of light in the light socket when I turn the switch on/off, not all the time mind, is it dangerous?:confused:
Replaced Socket, Light Now Odd [ 8 Answers ]
I just installed a new socket on my lamp. I previously had a three-way that got into the condition that it was just a one-turn lamp. It has not been three-way in a long time. So when I purchased this socket I purchased a one-way socket. Now that the socket has been replaced, the light seems odd. I...
Bathroom Vanity light with electrical socket [ 4 Answers ]
The question I am about to ask was asked in 2006 and I read some answers which I found useful but I would still like to ask it again. I need to replace my bathroom vanity lighting with one that has an electrical outlet since I do not have one in my small bathroom. Do you know a place where I can...
View more questions Search