Ask Experts Questions for FREE Help !
Ask
    MR Grouch's Avatar
    MR Grouch Posts: 4, Reputation: 1
    New Member
     
    #1

    Sep 6, 2007, 06:15 AM
    Wiring a 220 volt heater
    Please tell me what gauge wiring {for example 12/2 or 12/3} and breaker amperage {for example 30 amp 2 pole} I need for a 220 volt wall heater.:confused:
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Sep 6, 2007, 06:43 AM
    12-2 is 2 conductor w/ground. Good for 20 amps. If it requires 30 amps, you need 10-2 w/ground, if neutral is required then you will need 3 conductors plus ground.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

110 volt versus 220 volt mini heat pump [ 6 Answers ]

I have enclosed my screened porch to create more living space(Florida Room). I am using a single zone mini split ductless heat pump for heating and cooling. It has been calculated that I need a 12,000 BTU unit. However, most of these units are available in 110 volts and 220 volts. The 220 models...

Why 220 volt [ 12 Answers ]

I find that much of Europe uses 220V 50 cycle AC, while USA uses 110-120v 60 cycle AC. Why is this so, and does the 50 to 60 cycle variance cause significant problems? Thanks, Bob

Assemble a 220 volt outlet from two 110 volt circuits [ 5 Answers ]

I need help making a temporary 220 volt outlet cord. I have the female 220 v receptacle and two extension cords. I need this to connect a window AC. The electrician cannot come until mid next week. It is very hot here. He told me to put one these cords together for a temporary fix. He warned...

Wiring a 220 volt fan motor [ 1 Answers ]

I have a Dayton 1/3 H.P. motor Model no. 4M099C. It is a 220-230 volt motor. There are four wires coming from the motor. The purple is marked common, the black marked high, the blue marked med. And the red marked low. I want to connect these to run on 220. How do I go about connecting common and...

220 volt heater [ 2 Answers ]

I want to install a 220 volt wall heater. The feed line has a red, black, white and copper ground. The heater only has a red, black and ground. What do I do with the white (common) line?


View more questions Search