 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Why will my overhead light not turn off after insallation.
I am thinking the dimmer was not wired properly. This is the first time an overhead light has gone here. Inside the outlet there are three different holes in the outlet. Two are on either lower side and one is at the top of the outlet all with wires coming out. There are red, green, black, purple, orange, brown and yellow wires. Should I assume I need to use only the wires coming out of the upper hole to work an overhead light?
|
||||
Check out some similar questions!
Overhead light won't turn off
[ 4 Answers ]
We just replaced a dining room hanging light with a new fixture. There are 2 light switches that control this overhead light. When we turned the power back on the light came on but now we can not shut it off with either switch. What did we do wrong?
Overhead light installation
[ 2 Answers ]
I'm trying to install a new overhead light in the front entry way of our apartment. There are two positive and two negative. Wires coming out from the ceiling along with a red ground. I'm assuming this was intended for a light and fan to be connected seperatley. My problem is the only way I can get...
Overhead light switch
[ 1 Answers ]
How do I replace the overhead light switch on a l995 toyota camery
Thermostat insallation
[ 1 Answers ]
Wiring diagram needed for honeywell thermostat, model t8411R Wire colors for each terminal also needed. THX
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
