Ask Experts Questions for FREE Help !
Ask
    leth8dei's Avatar
    leth8dei Posts: 5, Reputation: 1
    New Member
     
    #1

    Nov 4, 2010, 06:53 PM
    What size breakers should I use?
    On my 110 normal circuits what size breaker should I use 20 amp or 15 amp the box is 100 amp service.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Nov 4, 2010, 07:22 PM
    Depends on what wire gauge you are using or installing and what you plan to do with the wiring. 12 AWG is 20 Amp and 14 AWG is 15 Amp. Kitchen circuits are 20Amp and you need 2 by code.. You can have a mix of 15 and 20 depending on other appliances. Not a simple answer. 100Amp is barely sufficient for a small older home and is too low for AC and electric range, dryer etc. Consider an upgrade to at least 150 Amp.
    leth8dei's Avatar
    leth8dei Posts: 5, Reputation: 1
    New Member
     
    #3

    Nov 4, 2010, 07:32 PM
    Comment on ma0641's post
    Thank you
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #4

    Nov 4, 2010, 07:36 PM

    Leth where do you live, in the USA votage went to 120 decafdes ago. ma0641 is spot on. Here is a chart for future reference Ampacity Charts If you are in the USA bedrooms now call for arc faults and wet areas GFCI but you may not be required to meet the new code if your changes are minor. If you are doing a major rewire or remodeling you'll need a permit and will likely be required to up grade

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Attempting to install GFCI circuit breakers (3 wires for 2 breakers) [ 6 Answers ]

OK here is my situation I have a Siemens box in my home I'm installing GFCI breakers to bring it up to code for insurance purposes Only thing is 4 rooms in this home are for some reason wired together on 3 wires (red black and white) connected to two separate breakers (30 Amps each) (two rooms...

Breakers size [ 2 Answers ]

Is it OK to run a 5amp machine on a 30amp circuit or should I put in a smaller breaker?

Max number/size breakers. [ 6 Answers ]

I have a Square D 100A main. There is no main breaker in the panel. What is the most number/size of breakers I can put in it. Right now I have 10 Slots. A 30amp, 5 20 amps and 4 15 amps. If I change the breakers to tandem breakers what is the max amps I can put in? Right now I have 190 amps. ...


View more questions Search