 |
|
|
 |
New Member
|
|
Mar 6, 2010, 03:18 PM
|
|
What is a Megger meter or tester use for, can it test the insulation on a wire? If no
What is a Megger meter or tester use for, can it test the insulation on a wire? If not what can I use to test insulation?
|
|
 |
Expert
|
|
Mar 6, 2010, 05:41 PM
|
|
It is a mega meter (megawats) not megger meter. Look for a mega meter in your local hardware store for testing.
|
|
 |
Uber Member
|
|
Mar 6, 2010, 06:15 PM
|
|
Tickle, you seem very nice, not giving a red, Would not advise on Electrical.
A Megger is an instrument to measue insulation resistance. I have not needed to use one. Actually, I believe I bought one, its buried right now, but never needed it. Was able to solve or fix with other instruments.
TK could likely give good advice.
They don't sell these at hardware stores, more of a specialty item.
|
|
 |
Expert
|
|
Mar 6, 2010, 06:17 PM
|
|
 Originally Posted by Stratmando
Tickle, you seem very nice, not giving a red, Would not advise on Electrical.
A Megger is an instrument to measue insulation resistance. I have not needed to use one. Actually, I believe I bought one , but never needed it. Was able to solve or fix with other instruments.
TK could likely give good advice.
They don't sell these at hardware stores, more of a specialty item.
Start, thanks for the heads up :), but isn't there a megawats meter ?
Tick
|
|
 |
Uber Member
|
|
Mar 6, 2010, 06:18 PM
|
|
There is, it would measure millions of Watts.
|
|
 |
Uber Member
|
|
Mar 7, 2010, 04:41 AM
|
|
If the cable that needs testing is Medium or High Voltage, 2KV and up, typically a Hi-Pot is used to test the insulation.
Hi-Pot is High Potential, and creates high voltage injected into a cable, unconnected at both ends. It will measure the milli-amp leakage, over time.
One of several:
Products - Hipot Testers - Electrical safety testers
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
How do you wire a set of phones for a homade tester
[ 2 Answers ]
I'm trying to make a set of testers for finding wires using a set of phone receivers and need to know how to wire the receivers up using a 9 volt battery for power . I used a set a few years ago but forgot how to wire them up.
What is a flame tester test for a Trane XE 80
[ 1 Answers ]
I have a Trane xe 80 heater. Two of the flame burners light up but not the other two. When turning on the heater, two will start up, then shut down and all we get is cold air. Only way all flames will burn is by putting the thermostat up to 90 degrees. We have been having to do this in this...
What is a flame tester test for a Trane XE 80
[ 3 Answers ]
I have a Trane xe 80 heater. Two of the flame burners light up but not the other two. When turning on the heater, two will start up, then shut down and all we get is cold air. Only way all flames will burn is by putting the thermostat up to 90 degrees. We have been having to do this in this...
What's the diff between diaelectric test and insulation test
[ 1 Answers ]
I am puzzled, What exactly is the difference between diaelectric test and insulation test.
Some says it the same, but others says it's because one applied power to perform the test the latter don't.
And some says both are using power but one is using AC power and the other using Dc power.
There...
View more questions
Search
|