Ask Experts Questions for FREE Help !
Ask
    lawdeedah's Avatar
    lawdeedah Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 12, 2011, 03:38 PM
    what gauge wire to use??
    I need to install wiring for a whirlpool induction cooktop model gci3061x but don't know what gauge wire to use. The booklet that came with it doesn't say.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Jan 12, 2011, 03:59 PM

    What is the wattage of the unit? It will probably say in kW.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Jan 12, 2011, 04:02 PM

    I got it right from their web site.
    Electrical Requirements
    40 Amps. 60 Hz. 240 V.
    You can use 8/2NM cable on a two-pole 40A breaker.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #4

    Jan 12, 2011, 04:03 PM

    Are you prepared/experienced enough to install this circuit, or are you having someone do it?
    lawdeedah's Avatar
    lawdeedah Posts: 2, Reputation: 1
    New Member
    		  
    #5

    Jan 12, 2011, 04:26 PM
    Yes I am experienced enough to install it. Thanks to the person who gave me the right wire to use!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is it safe to replacing a lighter gauge wire with a heavier gauge [ 11 Answers ]

Hi all, One of my baseboard heater (240v)'s wire was broken can I replace it with a heavier gauge wire? Also can different gauge ground wires (copper wire) be connected with a wire-nut? IS THIS SAFE TO DO? OR Will this create a fire hazard?

Can you substitute 14 gauge wire with 12 gauge? [ 10 Answers ]

I removed a fireplace and there are exposed 12 gauge wires. My question is can I put in a junction box and wire nut together 12 gauge with 14 gauge to wire a plug. I'm asking because I have a roll of 14 g. no 12 g.

Can I connect a 10 gauge wire to a 12 gauge wire [ 5 Answers ]

I have 20 amp circuit with 12/3 wire and want to attach 10/3 wire to it. Can't this be done?

Connecting 12 gauge and 14 gauge wire [ 4 Answers ]

Is it ever acceptable to attach 14 gauge to 12 gauge wire? I have a remodel situation where I have a 20 amp/12 gauge wired circuit powering outlets only. I want to tap off the end-of-run outlet to power an electric-venting skylight. The skylight comes with 14/2 wire. Can I tap off the 20 amp...

Connecting 14 gauge wire and 12 gauge wires in the same blue box. [ 2 Answers ]

I am wiring my basement. All the outlets are running off 2 independent 20 amp circuit breakers connected to each other by 12/2 wire. I wanted to run some stubs off my 12/2 outlets. All each stub would do is run to a small light (max 180 watts) and of course a light switch. Since I ran out...

View more questions Search