Ask Experts Questions for FREE Help !
Ask
    kevinwshepard's Avatar
    kevinwshepard Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 11, 2011, 09:24 PM
    What does it mean when Sperry GFI 302A tester that has all three lights illuminated?
    All other light combinations are described but no description for when all three lights are on. I am testing a circuit that was wired when I moved into the house. It is providing power and appears to be working however when I test other circuits in the house the lights display just the two Yellow lights indicating "Correct" (according to the key printed on the tester).
    Thanks in advance for your help!

    What does it mean when Sperry GFI 302A tester that has all three lights illuminated?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Nov 12, 2011, 04:44 AM
    I see what you mean I read the instructions and it does not show a condition with all lights on.

    http://www.sperryinstruments.com/doc...s/gfi-302a.pdf

    You either have a defective wiring issue not addressed by the tester, or the tester is defective.

    You can contact Sperry here for support:

    Sperry Instruments
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing three gfi,s that gone bad. Green lights up, but no jucie. [ 1 Answers ]

first to the left over kitchen sink, three wires== two blk, one white. Next one two blk and two white. And the bathroom, two blk, ad two white. Again... all green lights on, but no jucie.

Can I install a GFI for the cristmas lights? [ 3 Answers ]

Hi I want to have an outlet on the side of my house I guess it should be a GFI is this going to be OK to plug the cristmas lights to this?

Tester has three lights showing [ 7 Answers ]

The receptacle that is hooked up is for a light switch with the brass screw tab connect Missing and now power going to the bottom part of the receptacle. The power goes to the Switch first then to the top part of the receptacle. Al plugs in the group work but are all showing the three lights on...

Open Hot indicated on GFI tester [ 1 Answers ]

I have a GFI outlet and a switch in the same box. The light to the switch does not go on. The GFI does not work. The breaker in the GFI does not flip back to working order. I have not yet opened the box to check the wiring. What does Open Hot mean on the GFI tester? Thanks

Shared neutral GFI receptacles Fluorescent lamps and lights [ 1 Answers ]

Recently installed a 20 amp shared neutral circuit. One leg was 6 GFI receptacles, the other 8 lampholders with 13 amp Fluorescent lamps. Another 20 amp circuit had 5 4 foot (2) lamp cold weather fluorescent fixtures. Q1 Any code violations? Q2 Do they make a double GFI CB with a shared...

View more questions Search