I am making a light fixture into a swag light fixture as I have not outlet box to use. The new light fixture has a ground wire but none of the swag kits tell me what I should do about the ground wire.
Add your answer here.
Check out some similar questions!
Can I use a ground wire for a ground and live black or hot wire at the same time? [ 8 Answers ]
I only have 3 wires from my ceiling to connect to my fan/light, the black, white and bare ground. No problems setting up in this room to only one switch but I would like to have the duel fan/light switch in like in my other rooms without having to pull a wire from the ceiling down to the switch,...
Attaching a ceiling light with no ground wire [ 1 Answers ]
I just bought a house it was built in 1949 I'm trying to install a new ceiling light in the kitchen. There's a grounding wire on the new fixture but there is no wire coming from the metal box in the ceiling. Should I remove the grounding wire from the new fixture or should I attach the grounding...
Connecting two wires from light kit pull chain switch 2 wire to light kit for fan [ 6 Answers ]
I would like advise on how to attach the two black wires on the light kit pull chain switch to the light kit on the ceiling fan. I see there are two unattached wires on the light kit, one is black and the other is white. Are these the correct wires to attach the pull chain to? If so, how do I...
Attaching light kit Craftmade ceiling fan [ 4 Answers ]
I have Craftmade ceiling fan. I bought a generic Harbor Bay ceiling fan light kit. It seemed very straight forward installation, white to white, black to blue, but afterward the light would not work. I know the light bulbs work, I've tested them. The fan still works. On the wall is a...
Attaching Copper wire to alum. Wire in fuse box. [ 1 Answers ]
I have a electric stove to hook up in my house that had a gas stove. The electric 50 amp receptacle is already in place from the previous owner. The existing stove “aluminum” wiring goes into the circuit breaker box, but the wiring is cut off inside the circuit breaker box and is too short to...
View more questions Search