Ask Experts Questions for FREE Help !
Ask
    pastorheisz's Avatar
    pastorheisz Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 22, 2014, 02:16 AM
    What for disconnect below electric meter base
    My meter base has a 200 amp breaker and a bar with four lugs (two lines0. I need to run three lines from it (house, shop, barn) with each having their own breaker. How do I do this--what do I need to hook this up?
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #2

    Sep 22, 2014, 03:06 AM
    I promise I am not trying to be a smart***, but you need a licensed electrician.

    There are very code specific methods on how to run power to a remote building.
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
     
    #3

    Sep 23, 2014, 06:44 AM
    I suggest you do your research online and stay away from any forums. This isn't a DIY project for most people. Your research needs to be aimed at the technical issues and actual installation methods, not the "opinion" of other do it yourselfers. That being said, you need to provide way more information before any of us can steer you in the right direction. Weighing all the issues and alternatives, it certainly won't be a bad idea to get professional help with certain aspects lof the project. I'm not saying you haven't got the ability to do it... you just, at this point may not have the ability to do it correctly and safely. Good luck.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

200 amp outside meter box with disconnect [ 1 Answers ]

I am installing a new service upgrade from 100 amp to 200 amp my breaker box is 30 feet away from the meter box. Is the meter box fused after the meter to the breaker box or is it a pull switched

How many feet of wire between main breaker and meter base without a disconnect [ 1 Answers ]

What is the code for the length of wire between the panel box and meter base without installing a disconnect

Meter disconnect [ 2 Answers ]

Directly below a service meter before the underground wiring, do I need a fused or breaker type dsiconnect, or can I have a regular knife throw disconnect on a 3 phase system? Thanks

Wiring a combination meter and main disconnect. [ 1 Answers ]

I bought a Square D CQRA200 Meter/main disconnect combination and I expected to see the neutral isolated from the ground. Does the neutral and ground start from the same block?

Meter Base with disconnect and A/C Breakers [ 3 Answers ]

My meter base will have an outside 200amp disconnect. It will also have three 30amp breakers to feed the A/C units located a few feet from the meter. There will also be a 200amp main panel located in the basement. My question is if my disconnect outside is a 200amp and I have three 30amp...


View more questions Search