I have 2 15amp single pole light switches that have just 2 brass screws and a green grounding screw on them and I have 4 15amp 125v grounded single receptacles that I want to wire up for my light switches to operate 4 sets of fluorescent lamps which already have plugs on them and one that has a...

I rewired a leg from a switch to a new light fixture, but had to add a jbox since the romex couldn't reach the new fixture. I used a metal box, and pigtailed the ground to the green screw in that box. My switch isn't working, could the intermediate grounding be the problem? I am getting current at...

I wanted to install a Plugmold 6-outlet strip in place of an existing receptacle. I'm not an electrician but I have enough familiarity to do simple replacements with existing fixtures (I don't usually add anything new). This is the first time I have changed the purpose of a receptacle, trying to...

I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.

I am doing some wiring as part of finishing my basement. Is it required to ground the switches? Most of the regular two way switches have ground screw built in. Thanks