Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
No power to my light switch and wall sockets
[ 6 Answers ]
OK so I rewired an old old house and I I rewired the light switch and the wall sockets and now there is no power to any of this and I tested it with a voltage meter and there is absolutely no power
Wish to replace the lighting sockets on a european schrunk with 110 sockets
[ 1 Answers ]
Need to replace the lighting sockets on my european schrunk with 110 volt sockets, if any one knows the best place to get these items,
Can't get wall sockets to work after installing ceiling fan?
[ 6 Answers ]
Just installed a ceiling van, connected black/blue from fan to black in ceiling, white from fan to 2nd black in ceiling, 2 white are capped, 2 red are capped, I have two single switches that control power to the fan & light, this works, but two wall sockets and oven hood do not, any ideas what I...
Current in Ground wire in wall sockets
[ 8 Answers ]
I live in delhi india and around 2 years back moved into an apartment where I got the rewiring done. It seemed OK until the aircon switch in the voltage stabiliser kept burning up and had a foul odour. So I read up on it and checked polarities and it was reversed. But in the wall socket...
Replaced wall sockets, breaker over loaded
[ 2 Answers ]
Hi, I replaced the wall sockets on the main floor (13 of them). I installed the wires exactly the same. Origionally the kitchen was on 2 breakers, however now when I try to switch one breaker "on" it pops right away, and the other does nothing. I was told by the people at reno that I need to remove... View more questions Search
|