 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Two light one switch, please help
Hello, I am new here and was looking for some help. I just bought a ceiling fan and installed it myself. I have 2 lights in my room. One is yhe main light where I installed The ceiling fan, and the other is near my closet. After installing the fan, everything worked fine and I was about to hit the bed. When I switched off the switch to turn the closet light off, my fan stopped working. Both of the lights were being controlled by one switch. Can someone Please help on how to fix this issue? I need 2 switch for these 2 items. Closet light and ceiling fan. Please help for a DIY project.
Thanks |
||||
Check out some similar questions!
I added lights and outlets to my basement and all of the outlets work fine. Before I started the switch on the wall controlled one light and all of the others had pull strings. I've tried everything but the switch will not turn off the remaining three lights. What did I do wrong... how do I fix it?...
Wall switch box has two black wires and two white wires(spliced. New switch has black wire, red wire(light),yellow wire(fan), and green wire(ground). I think I need an independent wire for the fan and light. How?
I have wired a switch in the middle of the circuit. I put the white hot wire marked black on the top of the switch and the black hot wire on the bottom. When I look at a diagram they have the black on top and the white hot on bottom. I have connected the white hot to the black wire coming out of...
I am trying to swap out a dual switch for a switch that has a dimmer for the ceiling fan light and a three position switch to control the fan. The original wiring had white to white on switch, black to black on switch, and one black from light connected to the top switch pole and the other black...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
