Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I have a Jandy 2 speed motor to replace a 1 speed motor - help with wiring
[ 5 Answers ]
Hi, I have a Jandy 2 speed motor to replace a 1 speed motor and need help with wiring. Before removing the old motor, I wrote down the colors of the wires to the old motor terminals (L2 blue, l1 black). Both went to a timer (black on position 2 of timer, blue on position4 of timer). The new...
Replace 1/4 hp condenser motor with multi hp AO Smith motor and Condenser
[ 1 Answers ]
I am replacing my Payne 1/4 hp condenser motor with an A.O. Smith multi HP motor. I'm also replacing the capacitor (a round three prong piece) with an oval (two prong piece). In looking at the wiring diagram I'm supposed to connect the wires as follows: the two brown wires to the capacitor,...
Need to replace a Emerson air condition condenser motor, where to buy the motor?
[ 4 Answers ]
Need to replace a Emerson air condition condenser motor, need to now where to buy the motor? 208-230 volt, 1.8 amp, 1140 rpm,Model K55HXTAH5826, Frame 48Y. Air condition unit Model # PGAD47DIH5. Wayne.
Goodman humidifier My humidifier blow motor does not come on when the furnace is runn
[ 2 Answers ]
My humidifier does not come on when the blow motor kicks in Instead the humidistat energizes the cellenoid and it stays on. Should not the blower motor turn the cellenoid on?
Can I replace a 3p motor with a single phase motor.
[ 1 Answers ]
I have a holly- matic 3 phase 7.5 horse meat grinder- mixer. I do not have 3 phase, can I change the motor to a 7.5 horse single phase 220 motor? Thanks. Tom View more questions Search
|