 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Track lighting with pendants all not working
Track with 4 hanging pendants. Initially 2 bulbs blew, day later one came back on and has stayed on, replaced other pendant with proper wattage bulb and that one pendant (which is in the middle) will still not come on. This is not a new fixture, have replaced burnt out bulbs before. What could the problem be?
|
||||
Check out some similar questions!
Hi, Here is the situation. Two light bulbs blew. Our handy man told us that when you replace the bulbs 12v that you can not touch them or they will keep blowing. So we used gloves and changed the two blown bulbs. Voilą! Light. About 3 days later the first one blew again and then the...
One of the lamps was working, one was not on a two lamp track lighting fixture in my kitchen. I purchased 2 new lamps (so they would match). After they were installed, neither one worked. We tested the bulbs, they were fine. What's really strange is that when we tried to install the old lamp...
One out of three pendant lights on track system is not working despite new attempting new bulbs and new locations on the track. The system is less than one year old--any suggestions? Thank you
I have a Hampton Bay 7 light track light kit. Each of the 7 light fixtures on the track have a halogen 20W bulb in them. Recently, the power in my house went off for about 10 minutes. This happened at night, so all of the lights/ switches were off. After the power came back on, I noticed that...
I have a Hampton bay track lighting unit that has been installed and operating properly for 8 years. It gets it's electric freed from a nead-by ceiling fan. Earlier we switched the juice on and all 5 of the bulbs stopped working at once. The odd thing is the ceiling fan, which is in the same...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
