Hi, Thanks in advance for any help. I've been spending all day installing track lighting and finally think I figured out the issue but can't figure out why it's happening. I have the track installed & confirm that there is power to the unit (I used a test on the wires and then also on one of the...

I have a track light of three mini-floods. (not sure what brand.) I have replaced bulbs before. Now, one end light (never been replaced) is not working. I put a new bulb in, and it still won't work. I have made sure that the connection is still there, and that the individual on/off switch on...

Installed two new 3 bulb post lights on concrete entry piers, one bulb pops and burns the base immediately upon installation... I have checked the wiring and everything is wired correctly, I assume ths is a bad bulb socket and the fixture is defective, has anyone had this problem before?

Hi, Here is the situation. Two light bulbs blew. Our handy man told us that when you replace the bulbs 12v that you can not touch them or they will keep blowing. So we used gloves and changed the two blown bulbs. Voilà! Light. About 3 days later the first one blew again and then the...

The small bulb is impossible to remove. Do I remove the bulb only (not sure how since it won't come out) or is there more to changing a burnt out bulb than I realize w/Hampton tracking lights.