 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
We are not Google, write out your question in full detail as best you can and wait for any answer. Your sentence makes little sense to us so far, more detail please. What is meant by light fitting? Did both lights go on and off before from that one switch?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
1991 Honda accord ex s light stays on car does not want to shift into second gear.
The switch is a Combination Single Pole/3-Way. There is a light in the bathroom and one outside in the patio. I want to have them function independently but isn't happening. I inherited the wiring, so even with reading all these notes online, I still can't make it work. First question is - can...
Im having a problem with a light switch... the light stays on regardless of the position of the switch. I have swaped the switch out with a new one and still have the same problem. The switch controls to recessed lights over a fireplace. In the box on the wall there are several wires: 2 white...
A few days ago my shower light would not turn off when I pushed the switch to the off position. I kept trying and eventually, after pressing and holding down the off side, the light went off. I have not used the light for two days and this morning, when the shower was on, the light came on even...
I replaced a chandelier. Ceiling box had 3 black wires tied together, 3 white wires tied together, one red wire capped, and two ground copper wires tied together. The new light fixture had one white and one black wire. I connected the four black wires together and capped, the four white wires...
View more questions Search
|
