Ask Experts Questions for FREE Help !
Ask
    Pat J H's Avatar
    Pat J H Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 25, 2015, 01:48 AM
    Sensor light staying on after power cut
    How to reset outside sensor light which is staying on after a power cut
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    Jul 25, 2015, 03:06 AM
    Most of them will reset if you turn power off to them for at least 2 minutes. Then turn it back on.
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
     
    #3

    Jul 27, 2015, 04:17 AM
    ...or the sensor has failed. (photo sensors fail "on")
    get a new one?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pilot light went off when power cut off [ 0 Answers ]

Seem to be having a problem with my boiler - had the heating on for half hour last night then something tripped my power when I got everything back on I noticed my pilot light had gone out it took abouts 5 attempts to get it lit again, it day go back out a few times now I have managed to get that...

Light keeps staying on [ 3 Answers ]

My kitchen light is turning itself on even when the switch is turned off. I turned off the breaker to the kitchen. Any idea as to what the problem might be?

My light sensor keep blowing when power? [ 0 Answers ]

I have three outside lights (40w lamps in each) and they are controlled by an external 'PIR' they work fine until we have a power-cut. This seems to blow the 'PIR' and I've replaced it already, now its happened again? Would this be a 'surge' if so how do I correct it? Its getting expensive now,...

How do I adjust the light on my Hampton bay motion sensor light (P5993-50? [ 0 Answers ]

How do I adjust the light on my Hampton bay tiffany collection one-light motion sensor fixture (p5993-50)? Also, where can I get an owner's manual for this light?

Again w/ the pilot light not staying lit [ 4 Answers ]

Today I cleaned out the space beneath the water heater flue connection in the wall, supposedly this area is for that purpose; to clean out the flue. You would not believe what the last tenant jammed in there... 2 bed sheets! OK, well I cleaned that out, plus a half of a bucket of dirt. We replaced...


View more questions Search