Ceiling fan works lights don't ef200da-52

sis4auburn Posts: 1, Reputation: 1

New Member

Jan 27, 2015, 05:21 PM

Ceiling fan works lights don't ef200da-52

Lights used to work now they won't

stanfortyman Posts: 5,598, Reputation: 279

Electrical & Lighting Expert

Jan 27, 2015, 06:17 PM

Did you have a question?
If it's why don't your lights work then we really don't have much to go on.

Add your answer here.

Check out some similar questions!

Ceiling fan remote works on fan, but not lights [ 1 Answers ]

My Hampton Ceiling fan remote has stopped working correctly. I first changed the battery, thinking that it was not powerful enough to transmit the signal correctly. Didn't change it. The lights are on when the switch on the wall is on, but I can't turn them off with the remote. I tried checking...

Remote control on ceiling fan works for lights but doesn't work on fan on/off, speed [ 3 Answers ]

Just installed a hampton bay ceiling fan with remote control.. the remote control works on the lights to turn them on and off but will not turn on/off fan or contol speed. What's wrong.

Harbor Breeze Ceiling fan - fan works but not lights [ 2 Answers ]

Our Harbor Breeze ceiling fan/lights have been working for eight years. Tonight, we tried to turn on the lights but, they didn't work... tried the fan and it works fine. It's a 5 blade, 4 lights, with pull chains that also work off a light switch. I checked/changed the bulbs but, it still didn't...

Hamilton Bay Ceiling fan: fan works, lights do not [ 2 Answers ]

Fan has two pull chains (fan & lights) and a toggle switch along bottom circumference. Fan works but lights do not, regardless of pull chain and toggle switch positions. Everything used to work (2-3 tears old). Light bulb is good.

Installed Ceiling Fan: Fan Works/Lights Quit Working [ 3 Answers ]

I successfully installed a Hampton ceiling fan about three maybe four years ago and it has worked just fine up until about 4 months ago when the lights would start going off and then sometimes come back on intermittently. Suspecting a loose connection, I removed the light housing and found that...