You have determined that a 4700-ohm, 1/2 watt resistor on an electric circuit board I

jambroziivy Posts: 1, Reputation: 1

New Member

Jan 29, 2014, 02:23 PM

You have determined that a 4700-ohm, 1/2 watt resistor on an electric circuit board I

It's a class assignment hypothetical

donf Posts: 5,679, Reputation: 582

Printers & Electronics Expert

Jan 29, 2014, 02:56 PM

I'm sorry, but is there a question here or just a statement?

Add your answer here.

Check out some similar questions!

Need Casablanca model 4444 ceiling fan controller board 1/2W (small) resistor value. [ 6 Answers ]

Hi, I am trying to repair a Casablanca Four Seasons Ceiling Fan Model 4444 (Early 1980's Vintage). I am looking for the value of the small single resistor (R1) on the fan speed board, mine is blown, color code unreadable, and can't be measured on an ohm meter. If anyone has one on the bench...

Electric symbols on volt/ohm meter [ 1 Answers ]

What are definitions of the symbols on a simple volt/ohm meter ?

My electric circuit board won't reset? [ 1 Answers ]

I have had a flood in the bathroom. Now my circuit breaker switch just clicks back when I flick it up. My downstairs lights will not work,- but sockets will. My burglar alarm has also stopped working. All the rest of the switches will stay up. Could it be that moisture is causing problem....

How should I connect a 2.2k variable resistor in a circuit [ 10 Answers ]

how should I connect a 2.2k variable resistor with 3 terminals in a circuit?

Carrier Circuit Board - Bad Resistor [ 4 Answers ]

I have a Carrier Furnace which has a bad circuit board. I noticed that the resistors on the printed Circuit board look burned. The circuit board is a CES0110057-00 and the resistors reside on R57 and R58. I would like to replace the resistors but not sure how to identify the resistance level. ...