 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
LED strip through a remote wireless switch
Electric wiring LED driver with LED strips to a remote control switch?
Remote control switch back side http://s13.postimg.org/zdg0cli1j/IMG_3099_1.jpg Front side http://s17.postimg.org/etgi873tb/IMG_3101_1.jpg LED driver/12V adapter - http://s9.postimg.org/82ncigqvj/IMG_3100_1.jpg LED strips - http://s12.postimg.org/5n6r1ejcd/IMG_3102_1.jpg Basically I have to work the LEDs with the remote control |
||||
Check out some similar questions!
I have wireless 3g router and huawei data card I need to connect with my sony bravia led and activate internet
While working, I pulled the upper chain on my ceiling fan and the light and fan stopped working. I pulled the chain again and nothing happened. The LED light on the ceiling fan remote lights up when buttons are pushed. Nothing happens when I push the buttons.
The red LED light on the remote for my ceiling fan stays on. I thought it was a low battery so I changed battery but LED light is still on. Remote is for a Hampton Bay ceiling fan. The model # on remote is UC7083T.
We have a forced hot water heating system with Beckett Oil Burner, and Honeywell R8184G4009 intermittent ignition oil primary. The honeywell ignition Is about 3 years old and the heating system is 20 years old. Today, we noticed that The furnace is not turning on. When I went down to the...
Hi, I have a Hunter fan with light and remote control, with reversible switch on the remote. RC was working fine until recently, and now, the fan will not turn off with it. I do not have a wall switch. The light works fine with RC, and the reversing also works, so does the fan speed. So, what...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
