Ask Experts Questions for FREE Help !
Ask
    Revdan's Avatar
    Revdan Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 23, 2013, 04:46 PM
    Hampton bay track light installed and not working
    Checked light cable and tried new bulbs all show power but lights still don't work any help would be breat
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Aug 24, 2013, 10:21 AM
    I need a little more help from you, please.

    1) How did you check the "Light cable"?
    2) Is there a wall switch in the circuit?

    I know it may be a PIA question, but is this a new installation or has it been installed and working properly and you decided to change the bulbs?

    Can you tell me what the connections inside the cover are. I'm looking for the supply cable and possibly a switch cable.

    Don
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Aug 24, 2013, 06:51 PM
    Probably a loose wire, check ceiling box.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #4

    Aug 25, 2013, 05:59 AM
    A bad connection at a track fitting is pretty common, especially with cheaper track like HB. You have to be careful not to over tighten the set screws that hold the fittings in.

    Do you have power at the terminals of the end feed? Or is it a center feed?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Track 12V Pendant Light not working [ 3 Answers ]

I installed the track and pendant lights several months ago and all worked fine. Then we had a light blow and when we replaced the bulb it worked for a while and then doesn't work anymore. New bulb tested in other pendant works fine. Moved pendant to another location on track and no luck. I...

Hampton Bay track light - pendant light cord length [ 2 Answers ]

How can I shorten the length of the light cord on a Hampton Bay track system ? There is a tube that plugs into the track that has a serries of screws but there is also a screw at the light base also.

How many lights can be installed on a Hampton Bay low voltage track lighting system? [ 1 Answers ]

I have a Hampton Bay low voltage tracking lighting system that uses a toroidal transformer to provide 12 VDC to the track rails. The system was purchased from Home Depot and has two sets of identifying numbers. The bar code reads: 73546 15055 and the SKU appears to be 447 909. The system comes...

Hampton Bay Track Light [ 1 Answers ]

I have Hampton bay track lights and want to convert them to pendant lights. Is this possible? Is there a kit I can purchase? Thanks

Hampton Bay Track Head light [ 1 Answers ]

I just moved into a Condo that has a Hampton Bay Track Head and one of the lights is not working. How do I remove the light to replace it?

View more questions Search