Check out some similar questions!
Hooking up two exterior lights to one switch
[ 2 Answers ]
I have a old house the wire coming out of ceiling has only two wires no ground! I have recently installed french doors. I have two lights out side I ran a wire from home power and separate wires from each light to the box were the home power is. Can't figure how to wire it to a single switch I...
Exterior garage lights
[ 1 Answers ]
"Hello, I want to have 2 exterior garage lights controlled by the garage door opener(GDO)so that the exterior lights come on when the GDO light comes on. But, I would also want the same 2 exterior lights controlled by a wall switch independently from the GDO. Thanks"
Hampton Bay exterior light install
[ 3 Answers ]
The outside pole light fixture has a black, white and copper wire. At the pole I have a black wire , white wire, a red wire, a copper rod and a white covered copper rod. How do I connect? I connected the whites and blacks, but I don't know what to connect the copper coming from the fixture to.
Hampton Bay exterior lighting
[ 2 Answers ]
I have a Hampton Bay exterior porch light fixture with a sticker that reads: Use only A19 bulb 100 watts maximum. My question is: Can I use a compact fluorescent bulb 14watts? Thank you
Hampton Bay Exterior Motion Detect Lights...
[ 1 Answers ]
This will be a dumb question, but our contractor put up two of the Hampton Bay Motion Detecting lights on our detached garage. The problem is that they pitched the boxes, and the directions before we even had a chance to figure them out. Now, only the test works, which stays on for 10 seconds. ... View more questions Search
Add your answer here.
|