 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I'm not sure what you are asking about. There is a "National Electrical Code" (NEC) and there is a "National Fire Code". These two documents are published by the National Fire Prevention Association.
With respect to meter placement, that is up to the Utility Company. Disconnects can be placed at any point along the line side of the service. A "Firewall" under the NEC is defined as a wall that will not burn for about two hours. So I ask you, is this a homework question or a real question? |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I need to install a lit exit sign in a 759 sq ft. office. The door that I am putting this unit above is located far from the other already installed exit sign and would require going through a block wall at an added expense to the customer. Will the code allow me to connect the sign to an...
Hooking up a portable sign on a football field It's 30 amps 208 volts. Does the plug have to be a GFCI
I am installing a 300-pair unlisted (OSP)communications cable between 2 buildings. I intend to bury 4" Schedule 40 PVC conduit in a trench between the buildings. In one of the buildings I have to run the cable about 200 feet through a crawl space to the telecom room. The customer does want a...
Safety code for electric cords on floor
Are insulated recess housings required on the first floor of a two story residence if the first floor ceiling is not insulated?
View more questions Search
|
