 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pumptrol 9013 pressure switch.
I am installing a Square D water well pump pressure switch and upon replacing the switch there is a difference between the one on the system and the replacement part. The switch I am replacing has a manual off / start lever on the side of the grey box but the new replacement part does not have one. Is this a new design that doesn't require the manual lever ? I don't want to install the new switch and damage anything. Please advise, Thank you!!
|
||||
Check out some similar questions!
Adjusting pressure on Pumptrol Pressure Switch
[ 9 Answers ]
Model #9013FSG2J21BP
Pumptrol pressure switch
[ 2 Answers ]
I just put on a new switch and adjusted it to 30 cutin and 50 cutout like it says to do and when it shuts off, why doesn't it hold pressure until I run water? It loses pressure as soon as the swith and pump shut off.
Pumptrol pressure switch
[ 0 Answers ]
The switch doesn't shut off. It flickersback and forth. Sometimes it shuts off sometimes it keeps on running. Its like it is trying to make up its mind but doesn't know
Pumptrol pressure switch
[ 1 Answers ]
I have a fsg2 square d well pump switch. If I want to get the max pressure, can I do it by adjusting one of the screws only? Charles
Replace pressure switch Square D 9013 FSQ
[ 1 Answers ]
Where can I find a replacement for a feed water pressure switch , Square D model 9013 FSQ? The switch has a slight leak and is used on a reverse osmosis water treatment system.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
