Ask Experts Questions for FREE Help !
Ask
    vincent.barratt's Avatar
    vincent.barratt Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Feb 7, 2012, 12:22 PM
    Wiring problems
    I have power coming from the fuse panel box to several lights an switches but they don't work. There are also other lights on the same breaker that work. Still power running to the switches that don't work.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Feb 7, 2012, 01:04 PM
    How did you confirm "Still power running to the switches that don't work"
    vincent.barratt's Avatar
    vincent.barratt Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Feb 9, 2012, 06:08 PM
    I used a pen power tester
    vincent.barratt's Avatar
    vincent.barratt Posts: 5, Reputation: 1
    New Member
    		  
    #4

    Feb 9, 2012, 06:15 PM
    I don't know if the power is back feedint the panel or how to find out.they used to work then out of nowhere they stopped working for no reason. I checked the panel box, everything seems to be in order an the switches. I thought there might be a break in the line but I still have power to the switches an lights
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #5

    Feb 10, 2012, 11:46 PM
    Could be a loose neutral somewhere.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring problems [ 1 Answers ]

If I wanted to stop humidification during a call for cooling using a step down trans to 24 and not the 24 hum terminals new furnaces have how is it done,using a relay ? With a board and also with a single speed fan on a fan limit switch also how would I wire the fan centre in? diagrams would be...

Wiring problems [ 2 Answers ]

I just bought a Habor Breeze ceiling fan & light kit. The ceiling fan has 1 black, 1 white, 1 blue and a green wire. The ceiling wires have two black, and two white wires. These wires were hooked to the light fixture I took down. Which wires do I use to wire my new ceiling fan & light up?...

Wiring Problems. [ 4 Answers ]

I had an old General Electric Weatherington thermostat. I bought a new one yesterday and this is the old and new wire setup. OLD: O G Y R B W X2.

Wiring problems [ 2 Answers ]

I have installed recessed lighting in part of my home and it works just fine but when I tried to wire the last two the lights stay on when the swith is off. The last two have a black, white, ground and red where does the red get connected two why doesn't this work?:mad:

Wiring problems [ 3 Answers ]

I just swapped a 18 HP Briggs and stratton Motor over to another frame and the wireing harness will not match up. Should I take the ignition switch out and swap it over or does anybody have any suggestions.

View more questions Search