 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Casablanca fan troubleshooting?
My casablanca ceiling fan (Panama II) with intellitouch controls now has a problem when I turn on the lights only. Without the fan on, the lights flicker and one of the 4 bulbs does not light. If I then turn on the fan, the lights are good, but I cannot control the fan speed; it remains on hi. One piece of advice is to replace the RMM controller... that's a bit pricey at $134 if I am not sure that is the problem. Any other suggestions besides troubleshoot by remove/replace electronic assemblies?
|
||||
Check out some similar questions!
Correction to previous question. While the fan is operating, what would cause the fan to trip the circuit breaker and cease operating?
While the fan is operating, what would case it to trip the circuit breaker and cease operating?
My ceiling fan makes a clicking noise each time the fan rotates When the speed of rotation is increased, the clicking noise also increases. Several years ago this was happening and a Casablance repair person fixed it, bit I don't remember what he did. He came from Graham's Service in Deep River...
Fan makes a high pitched noice when I turn the power on on the W32 wall switch
Casasblanca ceiling fan with 3-way control switches. Fan stopped working. How can I determine if the problem is the fan or one of the control switches?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
