Check out some similar questions!
How do I wire a 4 wire fan motor when the old motor was 3 wire?
[ 1 Answers ]
My fan motor went bad on my heat pump. It is a ge motor with 3 wires black orange and blue. The black went to DF1 the orange and blue went to the cap. Well the ner motor I have has 4 wires. Brown, brown/white. Purple and black. The wire diagram says brown and brown/white to cap, purple to L1 and...
Emerson motor condenser wiring replacing 3 wire motor with 5 wire.
[ 5 Answers ]
Any recommendations? New motor apparently is capable of running in either direction by switching brown and purple wires going to the capacitor. Looks like then either the remaining brown or purple is spliced to or hooked up to the same terminal as the yellow. Thanks.
How to wire heater blower motor
[ 2 Answers ]
I am rewiring a Rudd Heater Blower motor. 240v 3 speed motor and I am trying to wire it. It doesn't matter how I wire it, as soon as I hit the 240v breaker by the unit the motor runs. I have even disconnected the thermostat totally and the motor runs constant. I am not an electrician.(Obviously)...
Change 4 wire condenser motor to 3 wire motor
[ 4 Answers ]
I need TO know how to wire a condenser motor. The one I am taking out is a 230 volt it has 2 brown capacitor wires and a black and white. The one I want to put in is a 230 volt/5 mfd capacitor motor. This one has a red wire a black wire and only one brown capacitor wire. How do I retrofit this.... View more questions Search
Add your answer here.
|