Ask Experts Questions for FREE Help !
Ask
    John3322's Avatar
    John3322 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 28, 2011, 07:38 AM
    Wiring to ge profile pdw7880jooss motor pump?
    I have replaced a motor pump for my ge profile dishwasher pdw 7880jooss. When I connect the main wiring harness to the motor can you hook this up backwards? I tried and can hook it up either way.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Oct 28, 2011, 09:17 AM
    The motor should work either way, these molded plugs usually are keyed so you can only connect one way.

    Match the colors of wires in both connectors when connecting if the connectors are not keyed.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring pump motor [ 6 Answers ]

How do I wire a 240 volt 2 stage pump motor where does white black red wires go thanks

Wiring replacement heat pump fan motor and capacitor [ 15 Answers ]

Hi. My heat pump fan motor died. I got a replacement motor and capacitor but the wiring is a bit different for the new parts and I was hoping you could help me sort it out. The old capacitor had three terminals while the new one has only two. In the old setup, there were 5 wires to deal...

Wiring pool pump motor [ 2 Answers ]

I have a new pool pump motor. When I disconnected the old motor, I found it was wired with two blue wires and a green ground. The new motor has only L1 and L2 connections. How do I tell the difference? The pump was wired as a 220

Need help wiring an AO smith 2 1/2hp two speed pump motor. [ 0 Answers ]

4 wires coming down from two speed switch, 1-green, 2-black, 1 red. The motor has a plate with 3 termination spaces marked 1, 2, 3 or 4. The green goes to the green grounding screw. Which terminals do the 2 black and 1 red occupy to get the two speeds. 230 volt motor, Centuary by AO smith.

Wiring pool pump motor [ 1 Answers ]

I have a new pool pump motor. When I disconnected the old motor, I found it was wired with two blue wires and a green ground. The new motor has only L1 nad L2 connections. How do I tell the difference?

View more questions Search