 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton Bay ceiling fan remote control problem
I have a Hampton Bay Redington III ceiling fan whose remote control is acting strangely. The remotes (two) will turn on the lights (and dimmer works) and the fan will run on High but the fan low and medium settings don't work. The fan reverse works too. I opened the fan circuitry to change the frequency (for the heck of it - it didn't help) but while the circuitry cover is off, the remote will work for low and medium. After I reinstalled the cover, it goes back to the problem (no low and medium). Thought it might be the battery, but both remotes are doing the same thing. Any thoughts?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Where does the remote sending unit actually install and fit inside the fan?
We recently purchased a Hampton Bay ceiling fan from Home Depot model number 52-amd We wish to change the direction of the turn of the fan , and so far the remote for that command is not reacting. What is the oproblem and is there a customer service to Hampton Bay. They do not have one...
I need the instructions of the Hampton Bay ceiling fan with remote control so that I can replace the electric light bulb and replace the blades Thank you Antonia
I installed a ceiling fan 3 years back. Wiring would have been difficult as it is located in a cathedral ceiling and walls didn't have any existing electrical wires. I used a remote control for the light and fan. Recently, it stopped working. I changed the battery and the remote control shows...
I have a Hampton Bay Windward II 54” ceiling fan and fluorescent lamp with remote control. I replaced the original fluorescent circline lamp with a new one. Now the light won’t turn won’t stay on or dim and the fan operates properly. Any ideas?
View more questions Search
|
