Ask Experts Questions for FREE Help !
Ask
    Hilbert's Avatar
    Hilbert Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 3, 2011, 04:54 PM
    200 Amp service with Meter/Bkr. Combo
    I have read lots of threads in here, in particular thanks to T.K. Russell for his many posts.
    In reading I have learned that when going more than 5' from meter pan to Bkr. Panel a Main Bkr. Has to be installed. This is separate from the Main Bkr. In the distribution panel. I currently have a 200 Amp service, but I am moving my distribution panel to the interior of the house approx. 40' away. I am using 2/O cable in PVC conduit 2". In order to protect the main fdr. (from meter pan to distribution panel) I need to install a bkr. right at load side of meter; What is the meter box with Main Bkr. called " Meter disconnect Box ? I have seen some but they all seem to carry Meter, Main and slots for branch ckts. I only need the Meter and main bkr. Part then I will be going express to my Distribution panel hitting another 200 Amp main within the panel. Home improvement stores don't carry them. My mast is Galv. Pipe which I intend to mount on this meter/bkr. Box (when I know what its called) then run PVC out the bottom of the new meter/bkr. Box. Any brandnames or model #s for what I am looking for ? Thanks !
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Jul 4, 2011, 04:33 AM
    There are various brands, Milbank is a popular one. Most offer a meter with a 200 amp breaker either just below or to the side.

    Since this involves changing the meter socket, best you first consult with your local utility, as most utilities only allow a certain type of meter socket.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Running 100 amp service panal 200 ft away from main 200 amp service [ 4 Answers ]

I am looking to find out how big the wire needs to be to carry the load. This will be a 100 amp service coming from a 200 amp main . It will need to travel 200 to 250 ft underground to a barn. If some one could help me that would be great thaxs)))

Can I downgrade a 200 amp service with a 200 amp main by adding a 100 amp breaker to [ 1 Answers ]

Can I downgrade a 200 amp service to a 100 amp service by adding a 100 amp breaker to the panel

60 AMP feeder line to meter and from meter is 200 AMP wire to my electrical box. [ 13 Answers ]

I have a old 60 AMP feeder line from the top of my house to the meter. From the meter is 200 AMP new wire. I was wondering if this is even safe and what would the cost be of updating the feeder line?

400 amp service, 2 200 amp panels, 320 amp meter socket [ 10 Answers ]

Hi, this is my first post here, but I have been reading a lot and have already learned a bunch. I want to thank TK already and hope you reply to this. I am in the process of designing my electrical system for my new home. I have some electrical experience, but am by no means a pro. I am...

2 200 amp disconnects and a 200 amp meter [ 3 Answers ]

On a new house I have 2 200 amp panels on the inside. What will be the best way to hookup the 2 200 amp outside disconnects and meter to look decent for the house?:o

View more questions Search