Ask Experts Questions for FREE Help !
Ask
    malas7's Avatar
    malas7 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 5, 2011, 09:47 AM
    I burned the whole chandelier or the wiring?
    One lightbulb was off and the bottom piece of the light bulb stuck in the socket of the chandelier. My mistake was touching the pliers to the bottom of the socket. The whole power in the house went down. Then I went to the basement pulled the breakers back on, and the power came back on except the light fixture I was working on. This time though all 5 lamps were not working. I pulled down the chandelier and tested the wiring and it seems that there is no power going through.
    What should I do?
    EPMiller's Avatar
    EPMiller Posts: 624, Reputation: 37
    Senior Member
    		  
    #2

    Mar 5, 2011, 08:03 PM

    I'm not trying to be impertinent, but if you were changing a broken bulb with a metal pliers while it was powered, I would recommend you call an electrician to fix your current problem. Your description does not give enough details to give much more help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Chandelier wiring [ 1 Answers ]

I have a chandelier that was previously hooked up that needs to be put back before I move. The chandelier has 2 identical brown wires(one has writing) and a bare thin wire. The ceiling a has a red power wire, 2 black wires, 2 white wires, and 1 bare thick metal wire. All the wires are confusing...

Wiring on old chandelier [ 1 Answers ]

I am hanging an old chandelier that has a white wire and a clear wire. Which one is the positive one?

Chandelier wiring [ 1 Answers ]

Need to know how to internally wire a eight light crystal chandelier. Need to splice the eight lights together.

Chandelier Wiring [ 2 Answers ]

I'm rewiring an old chandelier. Any suggestions as to where to start?

Wiring a Chandelier [ 1 Answers ]

I have an old cast iron chandelier which is not wired. How do we go about wiring it for use. It will have 5 lights. Thanks!

View more questions Search