Ask Experts Questions for FREE Help !
Ask
    donway's Avatar
    donway Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 18, 2010, 02:12 PM
    Harbour breeze Remote issue
    I have just purchased a Harbour Breeze universal remote with wall control. The remote works fine. The wall control does not operate. I have verified 110 in and have zero resistance to the circuit. It will at times work once either to change fan speed or shut the light off or on ,then is absent with out leave for the most part. I believe this to be a concern with the wall control unit? Your input if you have any known concerns.

    Doug
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jul 19, 2010, 01:33 PM

    Have you checked the dip switches on the wall control to see if they match the remote? How many wires does the wall control have?

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampon Bay Ceiling fan with Harbour Breeze Remote [ 12 Answers ]

For reasons of convenience I swapped the wireless remotes between a Hampton Bay and a Harbour Breeze ceiling fan. The Hampton was an in-the-wall remote with a REV button, and the Harbour was a hand held remote w/o a REV button. Both control units, which get installed in the fan base, appear...

Harbour Breeze (Junk) Ceiling Fan w/ Remote [ 8 Answers ]

I just installed the ceiling fan, correctly wired but does not work.

Hampton Bay Fan/Harbour Breeze Remote [ 1 Answers ]

My daughter recently purchased a house with the above fans and remotes. One of the mounting boxes was loose. I removed the fan, repaired the box, I did not disconnect the remote receiver from the house wiring, and then reinstalled the fan and now the remote will not work. I was sure that I...

Harbour Breeze Ceiling Fan and Light with remote Problem [ 1 Answers ]

The fan quite working a couple of weeks ago (it still spun but very slowly), and last night my remote got wet and today my light will not work at all nor will the fan I have checked the voltage on it and that is fine, I replaced the battery in the remote, and the bulbs in the light, checked my...

Harbour Breeze fan remote control problem [ 3 Answers ]

I was able to prove that my remote control problem is inside the fan, not the remote itself. I reset the dip switches and tried in on an identical fan and the remote works. I assume the problem is the transmitter inside the fan. Is this a customer replaceable part? If yes, where can I buy it?...

View more questions Search