Ask Experts Questions for FREE Help !
Ask
    DUMDUMDIDDLE's Avatar
    DUMDUMDIDDLE Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 6, 2010, 11:02 AM
    Boat/dockside inverter issues (rev polarity)
    I connected a 2000/4000 watt inverter to my boat and it works just fine as a stand alone unit.

    When I connect the inverter outlet to the dock side power cord to deliver power to the 110acv outlets on the boat the electrical control panel main switch shows red as reversed polarity.

    Can you explain what causes this condition and how to correct it.

    Thanks, Bill Mcmonagle
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Jul 6, 2010, 11:12 AM

    Bill, why not post this is a new thread.

    I have not idea how you backfed an inverter to shore power, but the whole concept worries me.
    DUMDUMDIDDLE's Avatar
    DUMDUMDIDDLE Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 6, 2010, 11:17 AM
    I did not back feed to the shore power itslef. I used the boat power cord, pliugged it into the boat inlet on the side of the boat and then plugged the adaptor into the outlet on the inverter so power will flow from the inverter to through the cord to the boat.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #4

    Jul 6, 2010, 12:09 PM

    <Moved to it's own thread and I cleaned up the yelling - all caps>
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #5

    Jul 6, 2010, 12:15 PM

    Best guess, the dockside power cord is wired incorrectly.

    I'll assume 120.

    Black to brass screw on dock cords. White to silver screws.
    Green to green.

    Make sure dock is wired correctly for polarity. Plug a polarity tester in the dock and even the boat outlets.

    You may have to make a neutral to ground bond when operating standalone. e.g. output of inverter to boat power.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #6

    Jul 6, 2010, 12:59 PM
    Quote Originally Posted by DUMDUMDIDDLE View Post
    i did not back feed to the shore power itslef. I used the boat power cord, pliugged it into the boat inlet on the side of the boat and then plugged the adaptor into the outlet on the inverter so power will flow from the inverter to through the cord to the boat.
    I cannot picture what you are doing. WHAT adapter?
    If you are on shore power why do you need the inverter.
    I am confused. :(
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #7

    Jul 6, 2010, 01:11 PM

    Here is what I think he's talking about. Generic Application Error Test JSP (Item)

    The equilivent of a generator input connector.

    But there is still some confusion.

    12V comes from where? (probably boat)
    Output of inverted goes to Boat Input connector.

    Nothing should be wrong with that EXCEPT, there is no connection to neutral and ground coming out of the inverter. That needs to be provided.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What to know about installing an inverter [ 1 Answers ]

I am looking to introduce the use of inverters in my company guest house and need guidance on what questions I should be asking .the suppliers and what answers I should expect to identify which marketing firm to go with?

Inverter fronwind turbin [ 1 Answers ]

I'm hooking up a wind turbin to help with electrical needs and I plan to hook the inverter right into my house power so it will be 12o v from another source i.e. inverter to 120v in house will this be OK or what

Do I need a 12v inverter? [ 1 Answers ]

I am buying an Infrared CCTV camera and wanted to power it from a 12v car battery. I am being asked if I need a 12v inverter but I have no idea. The camera power is 12v 1.5amp and has an AC adaptor that runs 12v 2amp. Would anyone there be able to tell me if I need a 12v inverter? If what do I need

Power output of an inverter [ 1 Answers ]

How do I increase the power output of a DC to AC inverter say, up to 2000W-3000W Please, help me I am desperate.

My boat and dock where destroyed by neighbors broken loose boat during hurricane [ 3 Answers ]

As I said above, during hurricane Wilma my neighbors boat broke loose from its mooring and floated down to my dock, two homes away, and proceeded to smash my boat and dock until the storm was over. My dock was destroyed and my boat was knocked off the lift and sank, Do I have any recourse, as my...

View more questions Search