Ask Experts Questions for FREE Help !
Ask
    emil1806's Avatar
    emil1806 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 22, 2010, 06:37 PM
    How to convert 220v ac outlet to 110v ac outlet
    Most of our appliances are running at 220v ac, I want to make a specific outlet that would run at 110v ac, so I can use my other appliances which are running at 110v ac only...
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Jun 22, 2010, 06:42 PM

    If you have a 240 volt receptacle, it is usually a pair of wires to the panel. Reidentify 1 as the neutral, the other as a hot, and coinnect to a single pole breaker sized no greater than the breaker.
    12 for 20 amps and #14 for 15 amps.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Convert Electric Dryer outlet to regular outlet [ 8 Answers ]

I just bought a gas dryer, leaving a funky 3 pronged outlet unused. The outlet was connected to the fuse box as a single circuit and I would like to let the new gas outlet take advantage of this. Is there any problem replacing the 'funky' electric dryer outlet to a regular three pronged outlet,...

Trying to connect 220v 3phase lathe to 220v dryer outlet. [ 12 Answers ]

I want to connect a 220v 3 phase lathe (2hp Baldor motor 2 pole plug with ground) to a 220v 3 wire dryer wall outlet. The lathe plug has black, white and green wires. The dryer outlet is black, white and red. I want to make an extension cord with 12/3 wire, male dryer plug on one end and female...

How do I run a 220v outlet from two 110v breaker switches? [ 4 Answers ]

I am a handy man but have never really messed with much electrical wiring. I need to run a 220 volt outlet to run a window unit AC. How would I go about using two existing 110 volt switches from my breaker to run a 220 volt outlet? I was told it can be done that way and it would save me from having...

Connecting new 220V line & tapping off a 110V outlet. [ 4 Answers ]

I have a 220V outlet on the outside of my garage, originally intended to power 220v compressors, welders, etc. I am installing a well not far from this outlet, which needs 220V and I want to run a line from the outlet (underground) line to the pump. How do I do the connections to the pump and can I...

Convert Table Saw from 110V to 220V [ 3 Answers ]

I have a table saw (Sears Craftsman Professional, 1-3/4hp) that can be converted from 110v to 220v. Can I just use the 110v plug it came with and plug it into a normal 110v receptacle that is wired with two hot wires and a ground? (I've run 12/2 NM on a 20AMP CB). Aside from the obvious risk of...


View more questions Search