Ask Experts Questions for FREE Help !
Ask
    sduecer's Avatar
    sduecer Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 18, 2010, 04:08 PM
    Hampton bay ceiling fan 855975 remote fan 9t
    Installed remote in fan. Having problems with fan and light. Off/on , speed, and light dimming. Do I need to bypass pull chain wiring if so which leads should I splice. Tried with pull chain for fan on high, and light on, but this doesn't work
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    May 18, 2010, 06:43 PM

    If you have pull chains and a remote the pull cahins should be set to high speed and brightest light, then leave them alone after that and just use the remote. Do not bypass or spice anything
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    May 24, 2010, 10:53 AM

    I agree with Ballenger. If you are having problems it is with the remote.

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay Ceiling fan remote [ 1 Answers ]

Just bought a Windward III 54" ceiling fan... have already successfully installed one previously... that one works like a champ! This WILL NOT REVERSE DIRECTIONS!! Anyone have any clue?

Hampton bay remote ceiling fan [ 2 Answers ]

Can a hampton bay winward III be operated without the remote control

Hampton Bay Ceiling fan remote [ 2 Answers ]

The remote for my hampton bay ceiling fan/light quit working altogether out of the blue this evening. How do I fis it? I tried a new battery but still no luck. Thanks

Hampton Bay Ceiling Fan Remote [ 3 Answers ]

I installed a Hunter ceiling fan with a Hampton Bay remote. The remote controls the fan correctly. The light works when pulling the chain but does not work from the remote. I wired the blue wire from the remote to the black/white striped wire from the fan. Any suggestions?

View more questions Search