Ask Experts Questions for FREE Help !
Ask
    Gaby Schmidt's Avatar
    Gaby Schmidt Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 15, 2010, 11:00 PM
    Running nmb cable through garage.
    I am running 6/3 NMB cable from my main to a 50 amp sub panel in the backyard. The total run is approx. 60 feet. Most of it will run through my attic, but about 20 feet will run through the garage. Can I feed the garage portion through pvc or aluminum flex on top of the rafters to protect it. If so, which would be better?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    May 16, 2010, 03:15 AM
    If the cable is above the rafters, why the need to protect it there? In any case , yes you can use conduit to protect it. PVC would be fine.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    May 16, 2010, 07:53 AM

    You must be planning to store junk on top of the rafters like most of us. In that case the cable should be protected or stapled on the side of the rfaters.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Running new TV cable [ 3 Answers ]

Currently have five TV's and a computer. Reception from Comcast is just fair. Checked cable connection and found that there are six splitters in the crawl. Should I run all new from the outside splitter? Run one line to each of the TV's? Or what is the best way to do this project? Any help...

Still running cable [ 1 Answers ]

Hello there, I had a question about running cable behind the fireplace and thank you to tkrussell for answering my question. After cutting an opening behind the wall, I found that there was insulation and a lot of space behind the studs and the flue. Is it all right to pull the cables behind...

Running coaxial cable above fireplace [ 1 Answers ]

Hello, I just bought a LCD TV and I want to put it above our fireplace. I want the wires to run in the wall and into our cabinets along the side about 3' away. Are there things I need to know about cutting into a wall above the fireplace? Is it the same as cutting into and pulling wires...

6/3 nmb exposed inside garage to spa [ 6 Answers ]

Project is to feed a spa, above ground pool pump and 1 pool light 100-125 feet from 200 amp main siemens panel. (the light is an aqualuminator that has a transformer and plugs into gfci outlet and installs in pool return line) I've got 6/3 nmb for inside garage run to spa that will exit bottom...

Running Bx cable for recessed lights [ 2 Answers ]

I just had recessed lights installed on the 1st floor of a 2 story home. The electrician ran the BX cable along the bottom of the rafters instead of drilling a hole through the rafters. There is no way get drywall flush against the rafter now because of the cable. Is this normal? Why...

View more questions Search