Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton Bay ceiling fan light fixture stopped working but fan still works why?
[ 14 Answers ]
New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:
Hampton Bay Remote Ceiling Fan - light works - no fan
[ 2 Answers ]
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
Remote works, light works, fan humms does not turn
[ 2 Answers ]
Hello, I have a Hamton Bay fan with a remote/no pull chain. The light on the remote comes on and does properly operate the light on the fan. It also turns on and off a humming noise but there is no movement from the fan itself. Of course, the house did not come with an owners manual. Is...
Hampton Bay Fan w/ Remote: Light Works, Fan Doesn't
[ 4 Answers ]
Sorry if this has been answered elsewhere but I couldn't find what I was looking for. I just installed a Hampton Bay Andover fan w/ remote (no pull chains) but the fan won't start. The light fixture works fine (using the wall switch remote) but I can't get the fan going. I tried the reverse...
Fan works but light doesn't. Fixed and now the light works but fan doesn't
[ 9 Answers ]
While I was at college somehow my fan stopped working. There is absolutely no explination from anybody but my mom did get a replacement so I didn't care too much. The fan has a ground from the mount(copper), ground from the middle of the fan(copper), a hot for the light(blue), hot for the... View more questions Search
|