Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What is always LIVE/HOT in main panel w/main breaker off?
[ 4 Answers ]
We are going to be putting a dedicated 20A/12-2 wire receptacle in the basement for our treadmill. When we are putting in the new 20A breaker, we are concerned with what is 'live' in the service panel. I know the 2 service wires are hot before the main but is there a chance anything else may be...
Difference between Main Lug and Main Breaker Panel
[ 8 Answers ]
What is the difference between a Main Breaker Panel and a Main Lug Panel and can either be used in new residential construction.
Load Center Main Lug or Main Breaker for the Attic
[ 5 Answers ]
I have a large attic (on 3rd floor), 38'x28', which is unfinished space. The 2nd floor central air-condition is located there and used to be fed by a 60 feet of 12/3 cable (I changed the cable to 10/3 to reduce the chance of voltage drop) and it's fed by a dual 15A breaker (240v breaker) in the...
Can I convert a main breaker Cutler Hammer loadcenter to main lug?
[ 1 Answers ]
I was wondering if Cutler Hammer made a part to convert a main breaker load center (CH) style, to a main lug panel. If so, does anyone know the part number or can you refer me to a location where I could find it? Cutler Hammer's website is not too user friendly. Thanks
A/c popping main breaker
[ 4 Answers ]
We purchased a reconditioned unit to replace an older unit in a mobile home. The unit worked in the shop where we purchased it. We hooked up the 2 110V lines and then turned on the thermostat to cool. Immediately following, the main 100 amp breaker popped. We then disconnected the thermostat wires... View more questions Search
|