Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton Bay Ceiling Fans
[ 8 Answers ]
I recently moved into a house that had beautiful ceiling fan in the master bedroom. This fan's blades have a ticking noise that increases as the speed is turned up. They are the snap in type blade not screw-in. I have tried to remove and replace them, used shims, and balanced the fan over and over...
Hampton bay ceiling fans
[ 1 Answers ]
I bought a hompton bay courtney 42 inch ceiling fan for my small kichen and the problem I have is the light theat comes with this unit in the paper work that comes with the fan it tell you that the max light bulb to use for this is that 13 watt energy saver spiral bulb that came with the fan. Is...
Hampton Bay ceiling fans
[ 5 Answers ]
I have a HB ceiling fan that is mounted very close to the ceiling (there is no space between the fan housing and the ceiling cover. The ceiling cover has no removal screws and is one piece and appears attached to the top of the fan housing. I was able to unscrew the fan motor shaft from the top...
Hampton Bay ceiling fans
[ 1 Answers ]
We are installing two Hampton Bay ceiling fans on a cathedral ceiling in a two story great room. For efficiency purposes, do the fans need to be mounted on poles, or can they be installed tight to the ceiling?
Hampton bay ceiling fans
[ 2 Answers ]
Does anyone know how critical it is to ground a ceiling fan? Is it OK to two wire it from a swag chain? Or will this electrocute someone? View more questions Search
|