 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
How do you hook up a wall thermostat to a 220v baseboard heater, when the 220v feed goes to the baseboard heater first?
I have a room which has three baseboard heaters controlled by one thermostat. Two of the smaller heaters did not warm at all. The remaining one heater ( the largest) is always on. The fuses were removed ( one side was extremely hot) and the heater cooled down. The thermostat single pole was...
I recently changed all the heaters and thermostats in my house with brand new heaters and programmable thermostats. All heaters are wired to 15 amps double pole breakers with the appropriate size wire(14 is it? It was inspected so it is the right size). In my living room, I changed the 2000 heater...
Hello, I tried wiring a 240v baseboard heater using a double-pole breaker and single pole thermostat. I connected both white and black at the breaker, paid attention to line/load using the black at the thermostat, wire nutted the white, and connected at the heater per instructions. When I...
I have to replace a missing baseboard heater 110 volt 1500 watt all I can find at home depot Lowe's etc is 220 volt can I use one of those hooked to 110 I do understand the output would be lower but actually don't need that much heat in that room anyway Thanks Gene
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
