| 
 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Hunter fan w/ light & reversing switch on remote, remote not working properly
 [ 1 Answers ]
 Hi, I have a Hunter fan with light and remote control, with reversible switch on the remote. RC was working fine until recently, and now, the fan will not turn off with it. I do not have a wall switch. The light works fine with RC, and the reversing also works, so does the fan speed. So, what... 
Connect a port on a remote switch to a secure segment on the local switch
 [ 4 Answers ]
 I have 2 Netvanta 1224R switches. On the main switch I have 3 Vlans setup. Vlan1 = main network (example IP 123.231.5.1) Vlan2 = Web Access (Example IP 69.115.851.202) Vlan3 = Secure segment (Example IP 123.231.8.1) On the remote switch I have 1 Vlan. Vlan1 = Main network (example IP... 
2way switch with fan remote
 [ 6 Answers ]
 Hello we are building a new home and have the ceiling fans wired with one switch for the fan and a 2way for the light. 2 of my fans came with remotes, not intentionally we picked for the fan not the remote. One fan will not work at all lights nothing, the other fan everything works on the 2 way... 
120V Halogen Dimmer Switch?
 [ 6 Answers ]
 I have a Hampton Bay flexible track ceiling lighting fixture (P/N 878-452) with five 120V 50W halogen bulbs. Is there a wall dimmer switch available that can dim these lights? (Even better if there is one that will work with the X10 remote system) Thanks Scott 
Remote switch for a hampton bay fan
 [ 1 Answers ]
 I have a hampton bay windward 2 gossamer fan controlled by a handheld remote. The remote functions all work fine (light. Speeds, reverse, etc... ). The problem is finding a wall switch to match the fan. The fan obviously has a receiver built into the motor head unit for the remote to function, but... View more questions Search 
 |