Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Stuck string on ceiling fan/light combo light side
[ 1 Answers ]
I have a ceiling fan/single light combo, and the pull string to switch on the light is stuck... How do I dismantle the light fixture part to get at the string?. Will I need to replace anything inside?
Dimming a Ceiling Fan Light
[ 1 Answers ]
We have Hampton Bay ceiling fans installed on double (bipole) switches. Is there a way to use the existing wiring to provide separate control for the fan and the lights so we can put a dimmer on the lights? Or is there another way to dim the lights - would a remote do this?
Dimming by pull chain the ceiling fan lights
[ 1 Answers ]
I have no wall switch for my ceiling fan lights or the fan itself. I wish to find a 3 position pull chain light switch so I can have OFF, FULL AND DIM for the lights. For DIM I would put a IN 4003 diode in series with that position wire. - That would give me 1/2 dimming. My problem is: I can't find...
Light dimming problem with Hampton Bay fan
[ 1 Answers ]
I recently installed a Hampton Bay ceiling fan which has a remote. When sleeping we run the fan without the light. My problem is that when all wall switches are on, but the light is turned off with the remote, the light will sometimes come on in the middle of the night. Also, when you turn the...
Hampton Bay Fan Light Dimming Problem
[ 3 Answers ]
Hi, I recently installed a new Hampton Bay ceiling fan. Everything worked perfectly for the first 3-4 weeks and then the lights started acting up last night. It started as the lights went bright-dim-bright-dim... and then the lights finally stayed dimmed while the fan is operating perfectly... View more questions Search
|