Ask Experts Questions for FREE Help !
Ask
    carolcam01's Avatar
    carolcam01 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 12, 2008, 07:12 AM
    Running from Pole 120 ft to run RV
    I am moving into a fifth wheel on my parents property (VERY rural area)

    I need to know the correct gage and type of wire to perform this. I will be running about 130ft from pole on a 60A circuit. I need 30A into camper and will be running additional 25 feet into shed with a 6000BTU 120v window unit air conditioner, a fridge, lights, and my sewing machines.

    I wish I could hire a professional, but no money, not to mention the county fathers in their infinite wisdom have decided that RV's can only remain in one location for two weeks - so if we don't get permits they won't know what is going on. This is my only option on a place to live so I need to get it right

    Thanks for all your help!

    Carol
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    May 12, 2008, 05:35 PM
    Considering you need to split this off to two separate areas makes this task that much more complicated. Do you have someone who knows what they are doing to do this for you?
    carolcam01's Avatar
    carolcam01 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 12, 2008, 07:35 PM
    No Unfortunately just me, but I am a quick study and take direction really I well.

    I am one of those bizarre people that can read a book and put something into practice the first time.

    But my Dad will be there to make sure I don't kill myself. ;) He was an electrician for a good many years, but has been out of it for over thirty years. I can't get him to do any of the work because he is undergoig chemo for colon cancer right now and isn't physically capable.

    I was thinking of running this to a separate box out by the RV, is this the correct procedure?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring single pole thermostat in double pole fixture [ 3 Answers ]

Hello, I am trying to install a line voltage programmable thermostat into a manual thermostat fixture. The programmable thermostat is Honeywell RLV430. Instruction manual here: http://www.homedepot.ca/wcsstore/HomeDepotCanada/images/catalog/b7867367-6c05-4c82-a97c-648044b91564.pdf The...

From double pole to single pole thermostat -2 extra leads [ 3 Answers ]

The double pole thermostat for the baseboard heater has a red and a black wire coming in (from the circuit panel) and a red and a black going to the heater. The new single pole only has a red LINE lead and a black LOAD lead. If I attach red to red and then black to black, I have black (from...

Double pole or single pole switch 4 reversing fan [ 4 Answers ]

I currently have a switch for my fan and another one for my fan light. I would like to reverse the fan movement. Would I use a double pole double throw or a single pole double throw switch?

Two Single Pole GFI's = one Double Pole 220v GFI? [ 6 Answers ]

Hello there, Installing a pool motor, 220v hayward northstar two speed. Could not find a double pole 40 amp GFI, electric supply store recommended two single pole 20A GFI's sharing a neutral? Does this make sense. I have a 40amp double pole in the main feeding the sub via the sub panel...

One pole of untied double-pole circuit breaker breaks [ 5 Answers ]

I recently purchased a new dryer (220 v appliance) to replace an older model. The old dryer was connected to the panel via a double-pole breaker except that there was no clip or tie between the poles. I changed the location of the outlet when installing the new dryer, replacing the cable with the...

View more questions Search