Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling light wiring?
[ 6 Answers ]
I just purchased two ceiling lights at Home Depot and when I got them home I noticed a warning on the box that said " use supply wire rated at 90 C, most homes built before 1985 use 60 C wire". My home was built in 1971. How do I tell if my wiring is okay. I checked the wire sheathing and the...
Light Kit for Ceiling Fan
[ 2 Answers ]
I just bought I Home Essentials ceiling fan from K-MART and I wired the fan portion just fine. The wires were nice and color coded Black to black, red to red, white to white and green to bare copper for the ground wire. I turned on the power and it works fine. When I shut the power back off,...
Ceiling fan/light
[ 9 Answers ]
I did away with the remote receiver and wish to use the wall switch only: I have a wall switch labeled "general purpose ceiling fan control - non solid state." Now this switch has one lever that operates the fan from off to high,medium, L1, L2. Below that lever is another lever that operates the...
Light kit for ceiling fan
[ 1 Answers ]
I just purchased a Harbor Breeze 52in. Helix II Ceiling fan. The light kit came with the fan. There are 5 G9 blubes that came with the light kit. My problem is that the fan works properly but the lights will not come on. The instructions say to "connect the black wire plug from the fan to the...
Trouble wiring ceiling fan to light!
[ 2 Answers ]
Novice here.. But I've done this before but can't get it rite this time.. URG... Have to replace the chain on ceiling fan.. fan works fine but no lite.. removed old chain but can't seem to get wires wired rite and can't get the lites to work.. The white wires are all set but don't know which of... View more questions Search
|