Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Light Kit for Ceiling Fan
[ 2 Answers ]
I just bought I Home Essentials ceiling fan from K-MART and I wired the fan portion just fine. The wires were nice and color coded Black to black, red to red, white to white and green to bare copper for the ground wire. I turned on the power and it works fine. When I shut the power back off,...
Hampton Bay Ceiling fan light kit...
[ 7 Answers ]
I have a Hampton Bay ceiling fan installed and accidentally purchased one without a light in it. I need a light in the room that it is installed, but am having trouble as to which wires the light kit goes to. I opened the ceiling fan and it has a 6 or 8 pin connector, but not any loose wires to...
Ceiling fan with light kit on separate switches
[ 1 Answers ]
I have recently replaced a ceiling fan with light kit with a newer model. I hooked up the wires from the new fan/light to the same wires in the ceiling box that the old fan was hooked up to. There are two switches on the wall plate, one for the light and one for the fan. When I hooked up the new...
Light kit for ceiling fan
[ 1 Answers ]
I just purchased a Harbor Breeze 52in. Helix II Ceiling fan. The light kit came with the fan. There are 5 G9 blubes that came with the light kit. My problem is that the fan works properly but the lights will not come on. The instructions say to "connect the black wire plug from the fan to the...
Ceiling Fan - Light kit removal
[ 1 Answers ]
I have a Hampton Bay ceiling fan - model CC 52HD. It currently has a light kit attached to it and I'd like to remove it, but need the "cap" that should fit over where the light kit currently is attached. Anyone know where I can find one of these? Are they standard? View more questions Search
|