|
|
|
|
New Member
|
|
Jan 11, 2007, 10:42 AM
|
|
Electric smell when ceiling fan light is on
Hi,
About a year ago we converted a ceiling fan without lights to a ceiling fan with lights. The ceiling fan has always worked fine, but when I turn on the lights it emits an "electric" smell. The fan part doesn't smell at all. We haven't used it much for that reason but I have had it on for a few hours at a time and the smell hasn't gone away. Any ideas as to what is happening?
Thanks
|
|
|
Uber Member
|
|
Jan 11, 2007, 12:08 PM
|
|
What type of light is it? Normally I'd tell you to use it until it goes away, but you've tried that. Take it apart and inspect for burning or melted wires, if you don't see any, you should be OK.
|
|
|
New Member
|
|
Jan 13, 2007, 06:00 PM
|
|
Originally Posted by gretchen71
Hi,
About a year ago we converted a ceiling fan without lights to a ceiling fan with lights. The ceiling fan has always worked fine, but when I turn on the lights it emits an "electric" smell. The fan part doesn't smell at all. We haven't used it much for that reason but I have had it on for a few hours at a time and the smell hasn't gone away. Any ideas as to what is happening?
Thanks
By "electric smell" do you mean ozone or burning insulation?
|
|
|
New Member
|
|
Jan 19, 2007, 01:20 PM
|
|
I am having this same issue with a recently installed Hunter ceiling fan. One light bulb burnt out prematurely, and I don't know if this is related to the smell issue, though the smell has continued with a new bulb in place. I don't know how ozone or burning insulation smells, but the smell from my fan light is more of an electrical smell than a real burning smell. Any help would be appreciated!
|
|
|
Uber Member
|
|
Jan 19, 2007, 07:13 PM
|
|
New fans often smell when the lights are on due to the heat. If it doesn't stop over time or you see smoke, then you need to take a closer look.
|
|
|
New Member
|
|
Jun 19, 2008, 06:48 PM
|
|
MikeandStephanie,
Does your recently installed fan happen to be a Hunter fan from Costco? I ask because we also recently installed two Hunter fans from Costco which have been emitting a mechanical or electrical odor. To me, it actually smells like a strong magic marker. I've climbed up on a chair to try and locate the smell and it seems to be coming from the lower portion by the light... not the top portion where all the electrical wires are.
Hopefully, the smell is just from the "newness" and will go away in a short amount of time. I am going to call Hunter tomorrow and ask some questions.
|
|
|
Uber Member
|
|
Jun 20, 2008, 11:09 PM
|
|
Hunter is pretty good with quality and quality control, issues are uncommon (unlike other 'H' brands). If it doesn't go away, contact them.
|
|
|
New Member
|
|
Jun 23, 2008, 01:58 PM
|
|
What did Hunter say when you contacted them? I have the same "problem" with a fan I just purchased at Costco last week. I am trying to contact Hunter now but have been on hold for over 12 minutes already. Any assistance would be appreciated. Thank you.
|
|
|
New Member
|
|
Jul 5, 2008, 07:10 PM
|
|
Originally Posted by jdhartmann
What did Hunter say when you contacted them? I have the exact same "problem" with a fan i just purchased at Costco last week. I am trying to contact Hunter now but have been on hold for over 12 minutes already. Any assistance would be appreciated. Thank you.
I too just installed a Hunter ceiling fan purchased from Costco and I cannot get rid of this smell. It is not electrical because the odor was quite apparent from when I unpacked it and waited for it to be installed. Does anyone know anything?
|
|
|
New Member
|
|
Jul 6, 2008, 06:52 AM
|
|
marcelle333, good news, the smell went away after a few days and the fan works perfect!
I did contact hunter and they apparently had not heard anything about this smell and told me to take it down and return it. Before I did all that extra work, I waited a day and the smell started to go away. After about two or three days the smell was pretty much gone. No idea what caused it but happy to have it gone and have a working fan :)
|
|
|
Uber Member
|
|
Jul 7, 2008, 12:56 PM
|
|
Yes we've had several reports of this. The smell will go away.
|
|
|
New Member
|
|
Sep 24, 2008, 01:57 PM
|
|
Originally Posted by jdhartmann
marcelle333, good news, the smell went away after a few days and the fan works perfect!
I did contact hunter and they apparently had not heard anything about this smell and told me to take it down and return it. Before I did all that extra work, I waited a day and the smell started to go away. After about two or three days the smell was pretty much gone. No idea what caused it but happy to have it gone and have a working fan :)
Just wondering if everything is still okay with your Hunter ceiling fan. We purchased one recently from Costco (with the light) and installed it. Our ceiling is 19' high, so my husband rented scaffolding to install it. We are now smelling a strange electrical smell when running the fan and are worried about using it. We would need to rent the scaffolding again just to check it! After reading all these comments, sounds like we aren't the only ones that have had this problem. I'm hoping it will be okay. Did anyone else have any more issues?
|
|
|
Senior Member
|
|
Sep 24, 2008, 02:12 PM
|
|
Originally Posted by ceilingfanrepair
New fans often smell when the lights are on due to the heat. if it doesnt stop over time or you see smoke, then you need to take a closer look.
I agree!
|
|
|
Uber Member
|
|
Sep 24, 2008, 05:50 PM
|
|
Let it run for a while, the smell should go away.
|
|
|
New Member
|
|
Feb 17, 2009, 07:20 AM
|
|
I recently installed two identical Hunter ceiling fans, one in each kid's bedroom. Each fan had a burning rubber/chemical smell after the light was one for while.
I found the following answer on bobvilla.com and removed the rubber bands. The smell went away. Just use care in tightening the screws so you don't crack the glass. I kept the rubber bands in case I decide to put them back in later (if I have vibration problems).
**************************
Hunter fans are well aware of a problem with a 'burning rubber smell' with their fans.
The problem is that there is a rubber band that goes around the glass globes of their light kits.
These rubber bands protect the glass from the turn screws that hold them in place to the light fixtures and these rubber bands also keep the glass globes or shades for rattling during fan operation.
The problem with these "rubber bands" is that they smell like burning rubber when warmed from the lights.
Hunter recommends simply removing the rubber bands and discarding them.
Been there. Done that. Got driven nuts to get the tee shirt over it.
But it is a non-safety problem that is easily ignored or corrected however you approach it.
|
|
|
New Member
|
|
Sep 3, 2010, 11:22 AM
|
|
I had the same electrical tytpe smell on our Hunter fan we purchased from Menards. This was happening after the lights would be on for an extended period. After googling around a little, one site said to remove the rubber bands from the light shades. The lights have been for 3 hours now, and no smell!! I hope this helps others with smell coming from there lights
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Hampton bay ceiling fan-light works-fan doesn't
[ 6 Answers ]
I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan.
I attached...
Hampton Bay Remote Ceiling Fan - light works - no fan
[ 2 Answers ]
After about 4 months of use, this began to happen.
I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days.
Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
Ceiling fan with light kit on separate switches
[ 1 Answers ]
I have recently replaced a ceiling fan with light kit with a newer model. I hooked up the wires from the new fan/light to the same wires in the ceiling box that the old fan was hooked up to. There are two switches on the wall plate, one for the light and one for the fan. When I hooked up the new...
Trouble with ceiling fan on a dual fan/light dimmer switch
[ 1 Answers ]
I just installed a new Harbor Breeze ceiling fan and dual fan/light dimmer, also from Harbor Breeze. Unfortunately, now I'm scratching my head... Do I have a bad dimmer switch?
Here's the problem:
1. The light will turn on only when the fan speed on the wall switch is set to high.
2. When...
View more questions
Search
|