Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling fan will not work after replacing 3 speed pull chain switch
[ 129 Answers ]
I just recently replaced a 4-wire (3-speed) Ceiling fan switch on my ceiling fan. The chain had broken off inside the switch. After installing the new switch, the fan wouldn't turn At all. I have tried the swithes at all speeds And even went out and purchased another switch thinking the first...
3-speed fan control switch wire connection
[ 23 Answers ]
Inside housing case are two boxes. One box has #1,2,3,and letter L. The other box has 1 red wire glued in silicone. There are two cords running into housing case. A gray cord coming from fan's motor with 5 wires: White,yellow,blue,gray,green w/white stripe. A black cord (two prong plug) with...
Hampton Bay ceiling fan speed switch
[ 6 Answers ]
My daughter's ceilng fan stopped working due to a faulty speed switch. When I opened up the canopy and unplugged the 9 prong coupler I then proceeded to take out the switch. Dumb move on my part. Should have marked wire colors down first. New (and old) switches both have L, 1, 2, & 3 imprinted...
New pull chain switch for ceiling fan light
[ 14 Answers ]
Hello, I just purchased a new pull chain switch for my ceiling fan light. The lead wires coming down are white and blue. The wires on the new switch are black, blue and red. Normally these are simple installs but I need help on how to wire these due to the different colors. Thanks!
Ceiling Fan Pull String 3-speed Switch
[ 1 Answers ]
What if someone by mistake wrongly connect the load on the switch (L) to one of the other wires (yellow, red, green)? Can this (cross wiring or mixing) cause (cross-wire) damage to the motor? Please help. I need this help urgently. View more questions Search
|