Ask Experts Questions for FREE Help !
Ask
    fridge_trouble's Avatar
    fridge_trouble Posts: 4, Reputation: 1
    New Member
     
    #1

    Nov 28, 2009, 02:26 PM
    Should refrigerator be on its' own fuse
    Should a refrigerator be on its own fuse?
    An electrician came into my home to fix some wiring and disconnected some wiring because he claimed it was unsafe. He said the fridge should be on its own fuse, and the type of wiring (lamp cord) used to wire to the electrical outlet for the fridge is incorrect.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Nov 28, 2009, 02:35 PM

    Do you mean that lamp cord was use to wire the refrigerator?
    fridge_trouble's Avatar
    fridge_trouble Posts: 4, Reputation: 1
    New Member
     
    #3

    Nov 28, 2009, 02:53 PM
    Apparently the electrician found that lamp cord was wired into the outlet for a light switch. When he disconnected that, the electrical outlet for the refrigerator stopped working. He thinks when previous owners finished the basement, they used the wiring for the fridge to wire the electrical for the basement room, and then somehow used the lampcord to connect back to the refrigerator electrical outlet.
    fridge_trouble's Avatar
    fridge_trouble Posts: 4, Reputation: 1
    New Member
     
    #4

    Nov 28, 2009, 02:55 PM
    Quote Originally Posted by hkstroud View Post
    Do you mean that lamp cord was use to wire the refrigerator?
    Apparently the electrician found that lamp cord was wired into the outlet for a light switch. When he disconnected that, the electrical outlet for the refrigerator stopped working. He thinks when previous owners finished the basement, they used the wiring for the fridge to wire the electrical for the basement room, and then somehow used the lampcord to connect back to the refrigerator electrical outlet.
    medic-dan's Avatar
    medic-dan Posts: 321, Reputation: 23
    Full Member
     
    #5

    Nov 28, 2009, 03:04 PM

    Yes, the refrigerator should be on its own circuit.

    Lamp cord is not rated as permanent wiring and is not to be used as you describe per the NEC.

    Looks like you found a good electrician. Pay him want he wants as he just saved your house.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #6

    Nov 28, 2009, 03:27 PM

    Lamp cord is not approved for permanent wiring. It is neither the correct size (usually) and does not have the proper insulation.

    It is a general practice to put a refrigerator on a circuit by it self. This is not a safety issue, just that if you over load the circuit, the refrigerator goes off and you don't know it, you loose a lot of food.
    fridge_trouble's Avatar
    fridge_trouble Posts: 4, Reputation: 1
    New Member
     
    #7

    Nov 28, 2009, 06:04 PM

    Thank you for the prompt response. I will try to get the wiring fixed asap.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

ECU fuse and turn/reverse signal fuse problems [ 3 Answers ]

He, I have a 1991 Honda Civic DX Hatchback and has had electrical problems since the day I got it. This sh*t sucks. First, it was the ignition that kept burning up and I went through 3, and found the solution. Fixed that problem and now, there's another. The ECU fuse in the engine bay keeps blowing...

Refrigerator leveling [ 1 Answers ]

My whirlpool (side by side) refrigerator was delivered but not leveled. It tips back and forth. There are no directions for this in the manual. Is it easy or should I call them back out?

Refrigerator leaking [ 1 Answers ]

My refrigerator is leaking on the inside, water gathers on the bottom under the bins

New GE Refrigerator [ 1 Answers ]

Hi I bought a new fridge in the USA and shipped it to Ireland , hooked it up to 110 volt socket , it's a lcd model , the fridge freeze is not activating , the compressor dose not seem to be kicking in ? Any advise on where to start looking?


View more questions Search